vpar problem

[jimmy_39]

hi guys
i have a problem with virtual partition.

I am to the
MON>
and I want to do the boot from the secondary bootdisk.
exists a command ?

[Jean-Louis Phelix]

Hi,

At this prompt level, your system is *already* booted ... You can just reboot it to boot on the other disk but all running vPars should be shutdowned first, or boot your vPars using vparload command.


Regards.

[Mister_Z]

Jimmy,

try the following:
MON> vparload -p vpar_name -B

where corresponds to the HW path for the secondary bootdisk (i.e, 0/8/0/0.5.0) You can obtain it running:
MON> vparinfo vpar_name

Hope this helps.

[Karthik S S]

To check if your system has already booted try Ctrl+A to toggle between vPars. Otherwise the best way is to use vparload or vparboot if you issue the command from with in the OS to boot other inactive partition.

-Karthik S S

[RAC_1]

Are you looking for

MON>vparload -p partition_name