HPE Community
Operating System - HP-UX
1838263 Members
4183 Online
110125 Solutions
New Discussion

VUE always starting in FailSafe mode...

 
Robin Abecasis
Advisor

‎08-28-2001 11:53 AM

‎08-28-2001 11:53 AM

VUE always starting in FailSafe mode...

Sorry, i've been banging my head against a wall here trying to figure out why one of our servers is defaulting to starting VUE FailSafe sessions, rather than the normal VUE sessions.

Any ideas?

Cheers,
Robin
Wots going on 'ere then?
0 Kudos
Reply
3 REPLIES 3
John Bolene
Honored Contributor

‎08-28-2001 12:31 PM

‎08-28-2001 12:31 PM

Re: VUE always starting in FailSafe mode...

Most likely a DNS issue.

Check to see if it knows who it is with nslookup on the name, and then the IP.

You can run dr_vue to see what it thinks is wrong.
It is always a good day when you are launching rockets! http://tripolioklahoma.org, Mostly Missiles http://mostlymissiles.com
0 Kudos
Reply
Wodisch
Honored Contributor

‎08-29-2001 09:18 AM

‎08-29-2001 09:18 AM

Re: VUE always starting in FailSafe mode...

Hello Robin,

have checked your "Xerrors" logfile and the
private one in ".vue/" ???
And did you verify that all scripts used during
login are free of failures/errors?

Just my ?0.02,
Wodisch
0 Kudos
Reply
Robin Abecasis
Advisor

‎08-29-2001 11:12 AM

‎08-29-2001 11:12 AM

Re: VUE always starting in FailSafe mode...

Ahhh, finally figured it out. Someone/something had set:

Vuelogin*xdmMode: True

in the /etc/vue/config/Xconfig file...

Robin
Wots going on 'ere then?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.