Operating System - HP-UX
1840239 Members
3374 Online
110162 Solutions
New Discussion

Want to check Disks functionality thouroughly.

 
pap
Respected Contributor

Want to check Disks functionality thouroughly.

I have few disks available and connected to the machine. which I haven't used since long time. Now I want to use these disks.
Is there any way to check the disks thoroughly before I place data in it.

Can I do it using HP stm or any other possible tools?

"Winners don't do different things , they do things differently"
9 REPLIES 9
Helen French
Honored Contributor

Re: Want to check Disks functionality thouroughly.

Hi Piyush,

Check this thread of Harry:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x29bc0bce6f33d6118fff0090279cd0f9,00.html

HTH,
Shiju

Life is a promise, fulfill it!
MARTINACHE
Respected Contributor

Re: Want to check Disks functionality thouroughly.

Hi,

You can use dd in order to read from /dev/rdsk/disk1 and write to /dev/rdsk/disk2.

Check errors during this phase ...

Regards,

Patrice
Patrice MARTINACHE
steven Burgess_2
Honored Contributor

Re: Want to check Disks functionality thouroughly.

Use STM (XSTM). This is proper diagnostic tool for logging all hardware problem. Once youve got it running (if installed - its called DIAGNOSTICS on the Support Plus CD) go to TOOLS -> UTILITY -> RUN Select LOGTOOL and view the raw or formatted summary log for lists of all hardware problems. If a disk is on its way out errors will be logged here. This should be the first indication of an impending disk failure
take your time and think things through
Bill McNAMARA_1
Honored Contributor

Re: Want to check Disks functionality thouroughly.

xstm (or stm ) should have exercise options under the expert tools area.

tools > exercise > run
tools > expert tools > info

To run Expert tools you'll need a HP only licence (as your rep)

Later,
Bill

It works for me (tm)
pap
Respected Contributor

Re: Want to check Disks functionality thouroughly.

Installing DIAGNOSTICS from support tools CD , will it requires reboot?

"Winners don't do different things , they do things differently"
Bill McNAMARA_1
Honored Contributor

Re: Want to check Disks functionality thouroughly.

no.
(at least in my case!)

http://www.software.hp.com/SUPPORT_PLUS/

Check the pdf here for info:
http://www.software.hp.com/SUPPORT_PLUS/info.html

It works for me (tm)
Sandip Ghosh
Honored Contributor

Re: Want to check Disks functionality thouroughly.

Which Version?
If it is the latest one on 11.00 it should not ask for reboot. But if it is on HP-UX 10.20 it will reboot.

Sandip
Good Luck!!!
pap
Respected Contributor

Re: Want to check Disks functionality thouroughly.

IS there any other tools which I can install to check disks? Those should not require reboot.
My system is 10.20
Server : E55

Thanks,
-Piyush.
"Winners don't do different things , they do things differently"
Sandip Ghosh
Honored Contributor

Re: Want to check Disks functionality thouroughly.