Where is the Entria II /Netstation software?

[John Mai_1]

Hi,

I have a Entria II box that I want to LAN boot GUI from a HPUX 11.11 server. Where can I download the Netstation software? and how do I connect a Entria to the server.

Thanks,
John

[Alan Meyer_4]

Found some here

http://www.ductape.net/~brianm/xterm/

[Helen French]

Entria II is not supported on HP-UX 11.11. Even if you install an older version of the software (Enware 1 or Enware 2), you may find it difficult to work with this OS. However, if you properly connect and configure the Entria II box, you can make use of the 'text' terminal screen.

[John Mai_1]

Thank you.

[A. Clay Stephenson]

You can actually install an older version but you must you the swinstall switch that forces an imcompatible version. The last version of this software was 10.20 but it runs fine on 11.11 because nothing actually runs on the HP-UX box itself. The HP-UX box simply serves as an NFS file server and a bootp server for the X terminal.

[Tom Schroll]

John,

I have a very old 700/RX and recently was able to pull it out of mothballs and get it to boot from a 11.0 server. I am using it as a dumb/serial terminal with some extra X-Windows functionality as a bonus. :-) I prefer the NFS method over TFTP if you have that luxury.

The following site really helped me out with finding the software and also had some good info on the hardware:

http://www.openpa.net/xterm.html

Good luck...

-- Tom

[John Mai_1]

Thank you for all your helps. I got it now.

John

[Tom Schroll]

John, you are welcome. Could you please take the "thanks" one step further and assign some points? :-)

Take care and enjoy your X-Terminal.