X25 socket programming pb with HP-UX 11.00

[Sockeel]

Hi,

I want to receive X25 calls with a working well program coming from 10.20.
But, accept() can't catch anything.
What has changed since 10.20 in X25 BSD socket programming ?

Thanks for answer

[Brian Hackley]

Phillipe,
You didn't indicate which version/type of X25 on 10.20 and 11.0, which helps to narrow down the problem. Details would be found in the Release Note and Programmers guide for the X25 version you are using http://docs.hp.com -> Network/Communication ->
"Advanced Communication Controller" for ACC/X25 and "X.25" for PSI-card X.25.
Example code may be found in you system: /var/x25/netdemo
Hope this helps,
-> Brian Hackley

[Sockeel]

This pb seems to be specific to the configuration :
HP9000/800/L2000-44
J2793B X.25 SX25-HPerf/SYNC-WAN B.11.00.06
driver j3525 involved