Xerox N/w printer

[wip]

Hi all ,

I have a requirement to configure one xerox printer to a HPUX 11.x SD .it is xerox network printer model Xerox 440ST.Any one tried this before .I am unable to use the jetadmin utilities to do this

thanks in advacne

Wip

[Steve Steel]

Hi

Look at lexmarks markvision
http://www.lexmark.com/US/products/networking/mvp/index.html


Or just install as a remote printer using the ip of the printer as the remote system and printer queue

Steve Steel

[Geoff Wild]

You can download the Xerox UNIX Printer Installer here:

http://www.support.xerox.com/go/results.asp?Xlang=en_US&XCntry=USA&prodID=DC440&ripId=

Install like:

cd /usr/local/src/xerox
tar xvf HPUXXPXX_3.01.48.tar
cd HPUXXpxxInstall
./setup

Then use /usr/bin/xpadmin to add xerox printer.

Rgds...Geoff

[Stefan Schulz]

Hi,

do a search on the XEROX web page. Normally they have a UNIX (HP-UX) printer installer available.

I once had a DocumentCenter for testing which had a pretty good gui on HP-UX for all the available options of this printer.

This tool could be used to print like you are used in a unix environment. Or to pop up a gui while printing to set the printeroptions as wished. Nice, easy to use and stable.

Hope this helps

Regards Stefan

[Geoff Wild]

Ahhhhhh! looks like I blew up the post :(

[Geoff Wild]

See if this works:

http://www.support.xerox.com/go/results.asp?Xlang=en_US&XCntry=USA&prodID=DC440&ripId=

[Geoff Wild]

Ok...once more with tinyurl:

http://tinyurl.com/2xsrq

cd /usr/local/src/xerox
tar xvf HPUXXPXX_3.01.48.tar
cd HPUXXpxxInstall
./setup



To add a printer you must use the Xerox printer installer: xpadmin