Xterm, Can't open display Couldn't find per display information

[accent]

Hi everybody
I'm working with HP-UX 11.11. From the last two days I have the following error when I try to start any Xterm (or dtterm,...).
#export DISPLAY=IP:0.0
#xterm &
# Error: Can't open display: 170.251.188.5:0.0
Error: Couldn't find per display information

In the syslog and in .dt directory I can't see any significant error. I restart the dtlogin daemon but the problem persist. I have telnet and ping with my workstation (windows).

Do any have any suggestion?

Thanks in advance.

[Robert-Jan Goossens_1]

Hi,

Just a thought, could you check your local PC, maybe you have recieved a new ipaddress (DHCP).

Regards,
Robert-Jan

[Sanjay Kumar Suri]

Use ipconfig command to determine the changed ip and then use the same in DISPLAY.

sks

[accent]

Hi Robert.
No, I have the same Ip.

[Sanjay Kumar Suri]

Check this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=434249

sks

[Robert-Jan Goossens_1]

By the way, I had a similar problem this morning, my xvision server did not run on my local pc.

Regards,
Robert-Jan

[accent]

This problem is the same for all the people who work with this server so, I think that the problem is in the server a it isn't in the clients.

[Joseph Loo]

hi,

have u allow connections to the X server, i.e. xhost +?

regards.

[accent]

Hi everybody
The problem was the network and the firewall. The network team changes any in the firewall and closes this service.

Thanks for all.

[accent]

The probles was in the network, any route was wrong and some packages lost in the network. In one way works fine and in other doesn't work.