Xwindows startup sequence

[William Pribble]

Hello all,

Can someone summarize the startup sequence of the Xserver and CDE? I am having trouble understanding the process. I have a C110 workstation that I can not get cde to start on the local monitor. I can get cde to start when I connect using exceed from my pc.

Thanks in advance.

[Sanjay_6 · Accepted solution]

Hi Elaine,

To reenable CDE if it is diabled, try this :

Uncomment the line in /etc/dt/config/Xservers
#* Local local@console /usr/bin/X11/X :0
Execute the following:
'/usr/dt/bin/dtconfig -e'
'/sbin/init.d/dtlogin.rc start;exit'

Hope this helps.

Regds

[Sanjay_6]

Hi Elaine,

Take a look at these threads below,

http://us-support.external.hp.com/cki/bin/doc.pl/sid=2d401b030edc64428c/screen=ckiDisplayDocument?docId=200000009872701

http://us-support.external.hp.com/cki/bin/doc.pl/sid=2d401b030edc64428c/screen=ckiDisplayDocument?docId=400000000010725

http://docs.hp.com/hpux/onlinedocs/B1171-90500/B1171-90500.html

Hope this helps.

Regds

[S.K. Chan]

Attached is CDE Startup TShoot Guide that I used to have.
Hope it helps a little ..

[William Pribble]

Thank you for all the great help. It is woking now.