HPE Community
Operating System - Linux
1833015 Members
2291 Online
110048 Solutions
New Discussion

Re: DL380 G4 Hangs on Post at Broadcom

 
Rick Thieme
Occasional Contributor

‎10-22-2007 05:14 AM

‎10-22-2007 05:14 AM

DL380 G4 Hangs on Post at Broadcom

Having an issue with a DL380 G4. Was running fine, but recently after a reboot, the server will hang during the POST when the Broadcom info appears. It will not let you get into the Broadcom config and will not go any further. The strange thing is if you open the dvd drive(no dvd in it), the system will then boot normally. Has anyone seen this before?

thanks
0 Kudos
Reply
1 REPLY 1
Steven E. Protter
Exalted Contributor

‎10-22-2007 05:21 AM

‎10-22-2007 05:21 AM

Re: DL380 G4 Hangs on Post at Broadcom

Shalom,

Yes,

The symptom went away after HP hardware replaced the system board, which includes to two broadcom cards.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.