HPE Community
Operating System - Linux
1833313 Members
3121 Online
110051 Solutions
New Discussion

Re: Red Hat linu boot disk mirror in integrity rx2600

 
dan_realtech
New Member

‎11-22-2010 04:32 PM

‎11-22-2010 04:32 PM

Red Hat linu boot disk mirror in integrity rx2600

Hello,

I have two 73 GB disk (sda,sdb) in rx2660 Server.Disk /dev/sda again partition as (/dev/sda1-/boot/efi,/dev/sda2-/,/dev/sda3-swap).How to mirror sda and all of its partitions to sdb using mdadm or any other tools.

Thanks in advance.
0 Kudos
Reply
3 REPLIES 3
DeafFrog
Valued Contributor

‎11-22-2010 11:28 PM

‎11-22-2010 11:28 PM

Re: Red Hat linu boot disk mirror in integrity rx2600

Hi ,

Rx2600 will have an internal raid controller

1. Power on or reboot the server.
2. Choose EFI shell from the console menu.
3. At the Shell> prompt, enter drvcfg -s and press Enter.

Select RAID Properties and press Enter. Then Select New Array Type.Create IM Volume and press Enter.you can follow the screen from there , hope this helps.

Regards,
FrogIsDeaf
0 Kudos
Reply
dan_realtech
New Member

‎11-23-2010 12:11 PM

‎11-23-2010 12:11 PM

Re: Red Hat linu boot disk mirror in integrity rx2600

Sorry,

I 'm looking for boot disk mirror of red hat linux and there is no SAS controller installed for Hardware raid.

Planning to do this using software raid using mdadm.
0 Kudos
Reply
Ivan Ferreira
Honored Contributor

‎11-24-2010 10:39 AM

‎11-24-2010 10:39 AM

Re: Red Hat linu boot disk mirror in integrity rx2600

You can see how I did it here:

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1290623956956+28353475&threadId=1098528
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.