HPE Community
Operating System - Linux
1833323 Members
3003 Online
110051 Solutions
New Discussion

rh4 cluster fencing ilo or ipmi itanium and superdome

 
SOLVED
Go to solution
SV Linux
Occasional Contributor

‎03-13-2007 09:26 PM

‎03-13-2007 09:26 PM

rh4 cluster fencing ilo or ipmi itanium and superdome

I try to use ilo fencing on two rx3600 Itanium based server with RH Cluster Suite and RH4AS, but it seems does not work; also IPMI interface seems not work; is there a solution to correct fence on HP Itanium cluster node ? And on Superdome that hasn't ILO what kind of fencing is possible to use?
0 Kudos
Reply
3 REPLIES 3
Ivan Ferreira
Honored Contributor

‎03-14-2007 03:04 AM

‎03-14-2007 03:04 AM

Re: rh4 cluster fencing ilo or ipmi itanium and superdome

If your cluster is connected to a SAN, you can use fence brocade to disable the sanswitch port to which the servers are connected.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Reply
SV Linux
Occasional Contributor

‎03-14-2007 03:53 AM

‎03-14-2007 03:53 AM

Re: rh4 cluster fencing ilo or ipmi itanium and superdome

I'm not lucky; i have cisco mds 9000 san and not brocade san....
0 Kudos
Reply
Ivan Ferreira
Honored Contributor

‎03-14-2007 04:17 AM

‎03-14-2007 04:17 AM

Solution

Re: rh4 cluster fencing ilo or ipmi itanium and superdome

In Red Hat Cluster Suite 4 U4, you have the option of configure a quorum disk instead of a fence device, see:

https://www.redhat.com/docs/manuals/csgfs/release-notes/CS_4-RHEL4U4-relnotes.txt
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.