Operating System - Microsoft
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 360 Gen10 - MIBs installation in Windows 2012

 
Highlighted
Visitor

DL 360 Gen10 - MIBs installation in Windows 2012

Colleagues,

May be someone have expirience with HPE MIB installation to monitor hardware via SNMP. 
Approach with HW moinitoring through iLO don't allowed by customer.

 

thank you,

Oleksandr

7 REPLIES 7
Highlighted
HPE Pro

Re: DL 360 Gen10 - MIBs installation in Windows 2012

Hello,

Thanks for posting your query in HPE Comunity.

Based on your query , I would recommend you to install the below version of MIB on the 2012R2 server and follow the on screen instructions 

* RECOMMENDED * Insight Management MIB update kit for HPE Systems Insight Manager for Windows

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_ef4857ab65374f2aba9d8c28cd#tab1

Hope this helps !

Regards,

 

pragav
I work for HPE

Accept or Kudo

Highlighted
Visitor

Re: DL 360 Gen10 - MIBs installation in Windows 2012

Hello Paragv,

Thnak you for reply, but how i can install MIB update (prposed by you) without MIB intsalltion.

When i tryint to  install prposed MIB iupdate installation program check that SIm installed, and ONLY after that trying to update MIB.

Since Generation 10 SIM agent not installed with SPP, so i can't perfrom MIB update.

Full SIM package installation (1,6 Gbytes) is not right way.

 

Thank you in advance,

Oleksandr

Highlighted
Acclaimed Contributor

Re: DL 360 Gen10 - MIBs installation in Windows 2012

Not sure what your problem is. A MIB (Management Information Base) is only useful for the trap receiver to "translate" a message, not for a client.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Visitor

Re: DL 360 Gen10 - MIBs installation in Windows 2012

Hi Torsten,

thank yiouy for reply.

Before Gen10 we can monitor Server HW events through inside agent. In GEn10 server this technology were removed by HPE. How we can monitor Server's SW and HW events via SNMP (feature already installed and configured). 

Right now only SW events availibe for monitoring by SNMP.

 

Thank you in advance,

Oleksandr

 

Highlighted
Acclaimed Contributor

Re: DL 360 Gen10 - MIBs installation in Windows 2012

Monitoring is done via ILO,

OS related information will be sent by AMS to ILO.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Visitor

Re: DL 360 Gen10 - MIBs installation in Windows 2012

Dear Torsten,

Thank you very much!

Could yuo please share some infromnation how we can sent OS related events to iLO? (pls sent me link to manual or forum).
This solution is accepteble (we can monitor server only via 1 IP@).

iLO usage is preffreble for us.

 

Thank you,

Oleksandr 

Highlighted
Acclaimed Contributor

Re: DL 360 Gen10 - MIBs installation in Windows 2012

Start here

https://buy.hpe.com/us/en/software/server-management-software/server-ilo-management/ilo-management-engine/hpe-agentless-management/p/5219980


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!