The McAfee Framework Service service hung on starting

['chris']

hi

Knows someone howto solve this startup error
on the NT4.0 SP6a machine ?

EventID: 7022
Source: service Control Manager
The McAfee Framework Service service hung on starting.

I have McAfee VirusScan Enterprise 8.0i

kind regards
chris

[Joseph Loo]

hi,

that event is only telling u that the McAfee service did not start.

has the service ever started? understand from the macfee website that Windows NT 4 is supported but not sure if u have the latest patches applied besides SP6a.

regards.

[Vibhor Kumar Agarwal]

Check your disk space.

Sometimes if you don't have enough free space then these types of things happen.

You can also try to reinstall or repair.

[Antoniov.]

Hi Chris,
what did you change recently?

Antonio Vigliotti

['chris']

but the McAfee Framework Service will be startet each time after restart automatically !

I've deinstalled Mcafee Virus Scan 7.0 and installed McAfee VirusScan 8.0

greetings
chris

[Vibhor Kumar Agarwal]

A bit of confusion,

In your first post you told that you have 8.0i and now you are saying that you have uninstalled 7.0

Is everything fine now.

[Roger Faucher · Accepted solution]

chris:

I know this product is at Service Release 10 (or higher). Contact McAfee for latest patches.

Make a great day!

Roger

['chris']

@vibhor_agarwalin

"In your first post you told that you have 8.0i and now you are saying that you have uninstalled 7.0"

Antoniov was asking about my last changes on this machine.
7.0 was installed before 8.0i
and I've deinstalled 7.0 and installed 8.0i
7.0 didn't have this kind of problem.

anyway I'll try to patch 8.0i

greetings
chris

[M_128]

We have an identical problem here as well. The model is called a D5M. 1.8P4 probably a 845 chipset. Whenever Mcafee 7.0 or 8.0i is installed the p/c hangs in various ways. Network properties can not be accessed. Device manager is unreachable. When shutting down, windows seems to close, but the p/c will not turn off as it should. The only way to keep the p/c usable is to disable McAffe frame work services.

Better yet the model number and serial number have no response when searching.

['chris']

thanks,

but if I disable McAfee frame work services
do I get all updates automatically over the Mcafee ProtectionPilot Konsole ?

[Roger Faucher]

Chris:

I would think not.

Make a great day!

Roger

[zhenzhuhua]

Now we encountered a radia issue in our project, which occurs between radia software manager and McAfee 8.0i. While we are installing MS Office 2003 using RSM 4.0i, there are several following situations.

1. if McAfee services(Mcshield.exe and UpdaterUI.exe) are enabled, the RSM will hang and you can but kill it using task manager.
2. If Mcshield.exe is enabled and UpdaterUI.exe is disabled, the RSM can install Office 2003 into the client machine but Mcshield.exe is changed into disabled status by Radia.
3. If McAfee services are disabled, the RSM can install Office 2003 well.