how to start the TCPIP$LPD_QUEUE process

[Kumar_Sanjay]

Hi,

I have not much experience working with LPD queue. i just reboot the server and this process is missing. I am unable to findout the startup of this process.
Could please someone help me to start this process.

Thanks.

[Hakan Zanderau ( Anders]

At first you need to configure LPR/LPD using
SYS$STARTUP:TCPIP$CONFIG.

The configuration will enable the service and
start the queue(s)

regards,

Hakan Zanderau
HA-solutions

[Kumar_Sanjay]

Andersson,

the service is already configured.

tcpip show service

Service Port Proto Process Address State

BIND 53 TCP,UDP TCPIP$BIND 0.0.0.0 Disabled
BOOTP 67 UDP TCPIP$BOOTP 0.0.0.0 Enabled
ESNMP 705 UDP ESNMP 0.0.0.0 Disabled
FAILSAFE 1 TCP TCPIP$FAILSAFE 0.0.0.0 Disabled
FTP 21 TCP TCPIP$FTP 0.0.0.0 Enabled
LPD 515 TCP TCPIP$LPD 0.0.0.0 Enabled
NTP 123 UDP TCPIP$NTP 0.0.0.0 Enabled
PORTMAPPER 111 TCP,UDP TCPIP$PORTM 0.0.0.0 Disabled
REXEC 512 TCP TCPIP$REXEC 0.0.0.0 Enabled
RLOGIN 513 TCP not defined 0.0.0.0 Disabled
RSH 514 TCP TCPIP$RSH 0.0.0.0 Enabled
SMTP 25 TCP TCPIP$SMTP 0.0.0.0 Enabled
SNMP 161 UDP TCPIP$SNMP 0.0.0.0 Enabled

[Walter Miller_1]

TCPIP$LPD_QUEUE is the symbiont process and will not start until an LPD queue is started. Check the TCPIP$LPD_LOGFILE for any startup errors.

[Kumar_Sanjay]

Problem resolved