HPE Community
Operating System - OpenVMS
1831232 Members
2582 Online
110021 Solutions
New Discussion

Re: OpenVMS cluster member boot failure

 
DURAY
Occasional Contributor

‎11-28-2005 01:05 AM

‎11-28-2005 01:05 AM

OpenVMS cluster member boot failure

Just after to have added the second member of a VMS cluster I unsuccessfully tried to boot for the first time this new member. The system disk is a common system disk on a RA8000 multibus failover config. & shared scsi bus designed.

The failure consist of a failed bootstrap. Message: "FAiled to send read to dkb101.... , Failed to read...., failed bootstrap"

boot cmd: b dkb101 -fl 1,0

The root ot this member is SYS1. The system allocation class specified is the same for both members.

Any idea?
0 Kudos
Reply
1 REPLY 1
Kris Clippeleyr
Honored Contributor

‎11-28-2005 01:08 AM

‎11-28-2005 01:08 AM

Re: OpenVMS cluster member boot failure

Hello,

I suppose this is the same problem as described in
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=978686
I suggest you read my comments and questions there.
Regards,
Kris (aka Qkcl)
I'm gonna hit the highway like a battering ram on a silver-black phantom bike...
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.