HPE Community
Operating System - Tru64 Unix
1839852 Members
1995 Online
110156 Solutions
New Discussion

Re: Can fibre based disks be mounted when booting from an installation CD?

 
SOLVED
Go to solution
Adam Garsha
Valued Contributor

‎10-22-2005 04:51 AM

‎10-22-2005 04:51 AM

Can fibre based disks be mounted when booting from an installation CD?

Tru64 5.1B-3 cluster

If booting from a CD to recover the system, will the fibre based disks be visible? (e.g. loose a disk group in your EVA and then rebuild the disk group and now you are going to recover from tape). Are there special commands that you need to enter to see the drives? (I know there would be work to be done to mount'em up, but I want to know if they will be visible/accesible in hwmgr, etc).

Second question, what if you have fibre based "tape drives" (e.g. a VirtualTapeLibrary), can you see the fibre based tape drives if you boot from the installation CD?
0 Kudos
2 REPLIES 2
Ivan Ferreira
Honored Contributor

‎10-22-2005 10:55 AM

‎10-22-2005 10:55 AM

Solution

Re: Can fibre based disks be mounted when booting from an installation CD?

Yes, they will be visible without problems. But the tape devices won't be visible until you run the following command:

dn_setup -install_tape

Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Adam Garsha
Valued Contributor

‎10-23-2005 02:50 AM

‎10-23-2005 02:50 AM

Re: Can fibre based disks be mounted when booting from an installation CD?

Thanks for the confirmation.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.