HPE Community
Operating System - Tru64 Unix
1829453 Members
1158 Online
109992 Solutions
New Discussion

CTERM Failure and RMC shutdown.

 
Ram Tomar
Occasional Contributor

‎08-03-2010 02:56 AM

‎08-03-2010 02:56 AM

CTERM Failure and RMC shutdown.

My file sever DS25 was powered OFF its own on yesterday. when i powered up the server i got messege on SRM console prompt that "CTERM Failure and RMC shutdown. Power supplies are ok".

When i check the binary log using wsea tools it was showing that "A defective regulator on the system board can cause this problem or a short on the system board or cpu module."

Thanx & Regards,
Ram
0 Kudos
1 REPLY 1
Kapil Jha
Honored Contributor

‎08-04-2010 07:39 PM

‎08-04-2010 07:39 PM

Re: CTERM Failure and RMC shutdown.

I think it just tell you what might be the problem so just log a hardware case.

BR,
Kapil+
I am in this small bowl, I wane see the real world......
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.