Other HPE Product Questions
1836644 Members
1660 Online
110102 Solutions
New Discussion

Re: HPE iMC detects "Duplicate devices are found"

 
egonzauy
Occasional Collector

HPE iMC detects "Duplicate devices are found"

Good morning.

-----------------------------------------------------------------------

The message: 

HPE iMC says "Duplicate devices are found. The IP addresses are "10.1.2.255,10.1.2.54", which are assigned to the same device"

---------------------------------------------------------------------

I have a network with 130 switches (controlled in an exclusive vlan), and since I have been using Aruba Instant On 1930 switches, alarms have started indicating that there is a switch with a duplicate IP in the switch network.

The issue appears with all (12 units) Aruba Instant On 1930 switches and 1 HPE 2530-48G switch unit (There are 9 additional 2530 switches in the network with no problem)

Obviously, the IP address is unique and not duplicated. The devices are in the correct vlan.

They don't generate any major inconvenience, just a "Discover Identical Device" warning

I did a lot of tests related to the configuration of the switches, and I have no more ideas to try.
Does anybody have any suggestions?

Thank you very much in advance

 

---------------------------------------------------------

HPE iMC PLAT 7.3 (E0708)

Aruba Instant On 1930 (JL681A) - 2.7.0.0 (103), Linux 4.4.120

HP 2530-48G Switch (J9775A), revision YA.16.02.0012, ROM YA.15.19

 

 

1 REPLY 1
Sunitha_Mod
Honored Contributor

Re: HPE iMC detects "Duplicate devices are found"

Hello @egonzauy,

Thank you for writing to us!

HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here: Aruba Airheads Community 

You can refer to the below link as well for more details:

HPE Networking forum migration to Aruba Airheads c... - Hewlett Packard Enterprise Community