Missing AP530 info in PCM+2.2 with Mobility Manager 1.1

[J Vesterdahl]

I have two AP530s operating on 1st and 2nd floor in a building. According to the web agent setup, the two APs er identically configured, but the "Radios" and "WLANs" info for one of the APs does not show up in PCM+2.2 with Mobility Manager 1.1.
In the real world, everything seems fine, and the users are happy campers.
The APS are set for radio 1 only, automatic channel selection, and inter-station blocking enabled. They are in fact close enough to "see" each other, but there's no problem with connections.
I've tried rediscovering, deleting and discovering, rebooting and, and ... well, everything I can think of. The communications parameters are OK for both APs, and they are both connected to the same 2824 switch.
The two APs are pilots for a campus-wide rollout, and although they seem to work, I'd like them to behave identically i PCM+ before I proceed.
Any clues?

[J Vesterdahl]

Hmmm ... looks like I'd messed up the configuration after all.
They should have been identically configured, but after loading the config from the good AP onto the bad AP and restarting the PCM server, they're both okay in PCM+/MM.
Oh, well.
Sorry for the interruption ...