BL30p servers are using 130 bays within RDP?

[Jason Menear_1]

Hello,

I have a BL p-class enclosure with the following servers; the enclosure is using a BL p-class enhanced backplane.

The servers physically in the enclosure are:

- BL40p
- BL20p G3
- Two BL30ps

Both BL40p and BL20p correctly show the number of "used bays". Only the two BL30p servers are showing "130" as the number of used bays.

This might be an ignorable issue, but I wanted to correct it so that issues don't present themselves down the road.

I'm running on v6.1/build 375, SP1, and hotfix E.

Thanks!
Jason

[Ken Henault]

Try upgrading the enclsure firmware. The firmware and instructions are available at:
http://h18000.www1.hp.com/support/files/server/us/download/22161.html