Rack Blade on Linux RDP

[RGI_Support]

Hi,
i have a rack blade (BL p-Class) already configured on my RDP (Linux version 1.30.18).

In the rack there are 7 servers installed whit relative ILO configured and working.
The problem is that from RDP i can see only 4 of 7 bay under:
Computers --> Physical Devices --> RackBlade --> Enclosure2

I nedd some help to understand how to make the other 3 bay visible under the RDP and in general, how to rack blade is phisically seen under the RDP.

Thanks a lot.

[Albert Austin]

Do all your blades have an OS installed on them? If yes, then push the aclient agent. IF no then you would need to initialise the blade into RDP.

[Gopi Sekar]

In general, the iLO details and rack configuration details are populated during PXE boot of the target systems or when Adlagent is installed and active on the systems.

Please do either of the above and let us know the results.

HTH,
Gopi

[RGI_Support]

Problem resolved.

It wasn't a client problem but a server problem, because the adlserver wasn't running after a past server reboot!

Now the clients communicate whit the server and i can see all my 7 bay in the phisical devices.

Thanks for the help!