HPE Community
ProLiant Deployment and Provisioning
1834745 Members
2715 Online
110070 Solutions
New Discussion

Update Firmware Job Failing

 
TConn
Regular Advisor

‎10-29-2009 10:06 AM

‎10-29-2009 10:06 AM

Update Firmware Job Failing

I am using RDP 3.83 on a W2K3 SP2 server.
We have a c7000 with BL460c Blades.
I am trying to update the firmware to ver 8.60, but the Blades just keep on reboot when I send the Update Proliant ML/DL/BL Firmware job to them. I have not modified the job.
I went back to the orignal Proliant_Firmware folder that was created during the install of RDP to try and push it, as suggested in other posts in this forum, but no luck. Just reboots.
There are no error messages in the job.

Any ideas because I have a lot of Blades to update.

Terry
Those who say it can not be done, should not interrupt those who are doing it.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.