270 Error ilo communication issue / Bios firmware

[techno_hpe]

Hello somlebody help me
Have hpe proliant DL360 G9.
Impossible to update îlo, impossible to boot provisioning média recovery.
The screen fix itself at hpe load image after boot.
Error code: 270 îlo communication issues : update ilo fw

[Jazz_ISS · Accepted solution]

Hello, 

The steps that lead to this problem are listed below:

1. During a UEFI boot, press the F9 key when prompted to enter the System Utilities menu.
2. In the System Utilities menu, select Embedded Applications.
3. In the Embedded Applications submenu, select Integrated Management Log (IML).
4. In the Integrated Management Log (IML) submenu, select View IML.
5. If booting Windows Server 2008 R2, 2012, or 2012 R2 with SPP Version 2014.09.0 installed, Windows Server will stop responding while attempting to load.
6. Reboot the server.
7. The server will halt with the "270 - iLO FW Communication Issue" POST error.

Issue is resolved with iLO Firmware and BIOS update.

1. Update the iLO Firmware to revision 2.02 or later.
2. Update the BIOS to Version: 1.20_08-26-2014 or later.
3. If the issue persists, please power down the server and remove PSU and connect it back after 30-60 seconds.

[techno_hpe]

hello JAZZ_ISS

Thank for your issues

can you hellp me now to find out hp dl360 g9 final bios upgrad.

[Jazz_ISS]

Latest version is 2.76

https://support.hpe.com/hpesc/public/km/product/7252838/Product#t=DriversandSoftware&sort=relevancy&layout=table&numberOfResults=25&f:@kmswsoftwaretypekey=[swt8000194]

[medaxc]

I have all these errors at once: 329, 270, 312, 333

and it was problem with loop in network?! Belive or not!