HPE Community
ProLiant Servers (ML,DL,SL)
1823141 Members
3277 Online
109647 Solutions
New Discussion

Adding an IDE hard drive to the IDE cd-rom cable of a ProLiant ML370 G2

 
Jerry_61
New Member

‎06-09-2003 03:32 PM

‎06-09-2003 03:32 PM

Adding an IDE hard drive to the IDE cd-rom cable of a ProLiant ML370 G2

I need to move some data around on the Ultra Wide Scsi drives setup with RAID. In order to do so, I would like to install a large IDE hard drive on the cd-rom cable and copy the necessary data over from the Scsi hard drive to the IDE hard drive. Will the system still boot from the the Windows 2000 server installed on the Scsi drives and allow me access to the Scsi hard drive? Do I need to set anything in BIO or with primary/secondary jumper settings on the hard drive? Any help would be appreciated!
0 Kudos
Reply
1 REPLY 1
Sunil Jerath
Honored Contributor

‎06-09-2003 06:40 PM

‎06-09-2003 06:40 PM

Re: Adding an IDE hard drive to the IDE cd-rom cable of a ProLiant ML370 G2

Hello Jerry,
Unfortunately IDE HDD is not supported on the IDE channel for the CDROM. Resulting system wont perform.

Regards,
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.