HPE Community
ProLiant Servers (ML,DL,SL)
1820482 Members
2350 Online
109624 Solutions
New Discussion

Re: burning HP ISO images to flash drive

 
SOLVED
Go to solution
kkpro
Regular Advisor

‎04-14-2015 02:05 AM

‎04-14-2015 02:05 AM

burning HP ISO images to flash drive

Hi,

 

When using "default" utility - "HP USB key Utility", version 1.7 - process of burning is always slow, now trying to burn new SPP - lasts hours.

There are a lot of other utilities, for example "Rufus ISO", seems to fastest, - same SPP was about 2-3 minutes, but when booting this flash drive, always got strange errors, like "Can not find kernel image vesamenu.c32" and such.

Any suggestions ?

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎04-14-2015 02:16 AM - last edited on ‎11-03-2022 03:17 AM by

‎04-14-2015 02:16 AM - last edited on ‎11-03-2022 03:17 AM by

Solution

Re: burning HP ISO images to flash drive

USBKey Utility 1.7 cannot process the current 2015.04 SPP because it is too large.

 

Use Version 1.8 (32-bit) or better version 2.0 (64bit) from the SPP ISO.

 

Version 1.8:

https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_0707359ff39b4d338e76dd0905#tab-history

 

Version 2.0:

inside the SPP ISO - https://support.hpe.com/

 

[Note: broken link updated/removed by Mod]


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.