HPE Community
ProLiant Servers (ML,DL,SL)
1827286 Members
1657 Online
109717 Solutions
New Discussion

Re: Can ilo2 be connected and accessible without using any terminal devices

 
rajeevkeds
Occasional Contributor

‎02-28-2009 10:44 PM

‎02-28-2009 10:44 PM

Can ilo2 be connected and accessible without using any terminal devices

we want to install DL380G5 with RHEL 5.2 so we need ilo2 connection for remote console and maintenance activities.

Can ilo2 be connected and accessible providing IP only and without using any terminal devices like cyclades, avocent or mergepoint ?

thanks in advance,

Raj
0 Kudos
3 REPLIES 3
Rob Leadbeater
Honored Contributor

‎03-01-2009 04:33 AM

‎03-01-2009 04:33 AM

Re: Can ilo2 be connected and accessible without using any terminal devices

Hi Raj,

Yes it can. If you point a browser at the IP address of the iLO you'll be able to get to a web based remote console.

If you need a full graphics console, then you'll need a iLO Advanced license.

Cheers,

Rob
0 Kudos
rajeevkeds
Occasional Contributor

‎03-01-2009 08:32 PM

‎03-01-2009 08:32 PM

Re: Can ilo2 be connected and accessible without using any terminal devices

Thank you Rob !!!
0 Kudos
rajeevkeds
Occasional Contributor

‎03-20-2009 07:12 AM

‎03-20-2009 07:12 AM

Re: Can ilo2 be connected and accessible without using any terminal devices

We got an answer and it worked for us.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.