HPE Community
ProLiant Servers (ML,DL,SL)
1819904 Members
2028 Online
109607 Solutions
New Discussion

Can't find Intelligent Provisioning - HP proliant DL120 GEN9

 
SOLVED
Go to solution
AlexRD
Occasional Contributor

‎12-16-2019 07:15 AM

‎12-16-2019 07:15 AM

Can't find Intelligent Provisioning - HP proliant DL120 GEN9

HI,

To reinstall the server HP Proliant DL120 Gen9, according to the manual, says I must enable in BIOS / PLAform configurations (RBSU), Intelligent Provisioning (F10 Prompt). But this option does not exist. How can I install a new operating system?

 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎12-16-2019 11:01 AM - edited ‎12-16-2019 11:12 AM

‎12-16-2019 11:01 AM - edited ‎12-16-2019 11:12 AM

Solution

Re: Can't find Intelligent Provisioning - HP proliant DL120 GEN9

If you see F10 for IP during POST you should simply press F10.

If this is not enabled, do the following:

To re-enable Intelligent Provisioning:
1.
Reboot the server and, when prompted, press F9 to access the UEFI System Utilities.
2.
From the System Utilities screen, select System Configuration?BIOS/Platform Configuration
(RBSU)?Server Security?Intelligent Provisioning (F10 Prompt) and press Enter.
3.
Select Enabled

 

You may also consider to recover Intelligent Provisioning:

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f6abd3e3803e4b2395eee361c3


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.