Chelsio T520-CR in a ProLiant

[jla1]

Hi

I would like to test a Dell Chelsio T520-CR, I have had compatibility problems on my PowerEdge R320, which is the server I use to test and study.

The server is not able to boot with the NIC installed, so I thought about purchasing a ProLiant server to install my Chelsio NIC.

I have thought of a ProLiant ML110 G5, does this type of server have compatibility with this type of Hardware? Does any other type of server offer compatibility?

I think the ML110 G5 has an intel main board right?

I know it's an old server, but I just need to test with my NIC and nothing else.

The operating system would be FreeBSD, the current stable version. Could someone confirm if I would have compatibility problems with the server and my NIC, Freebsd does support the NIC.

Thanks.

[Suman_1978]

Hi,

Chelsio will be the best people to suggest you the compatibility between this card and a ProLiant server.

https://www.chelsio.com/wp-content/uploads/2013/10/T520-CR-PB.pdf
https://www.chelsio.com/nic/unified-wire-adapters/t520-cr/

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases