ProLiant Servers (ML,DL,SL)
1827295 Members
4003 Online
109717 Solutions
New Discussion

configure DB array as SB array

 
SOLVED
Go to solution
VeronicaTobon
Advisor

configure DB array as SB array

Is possible to configure a Dual bus storage array as a single bus array?
I have a 302970-b21 db storage array and I want to configure with only one scsi cable.
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: configure DB array as SB array

I think this was already solved in your other thread:

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1239685

The difference between the SB and DB model is the I/O module.

If you connect only 1 cable to the DB module, you have only the left *OR* right half connected.

Replace the DB with a SB module to get the SB model.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: configure DB array as SB array

Remember to read this:

http://forums12.itrc.hp.com/service/forums/helptips.do?#33

;-)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
VeronicaTobon
Advisor

Re: configure DB array as SB array

ok, we'll buy nee modules.