ProLiant Servers (ML,DL,SL)
1833776 Members
1851 Online
110063 Solutions
New Discussion

Re: Converting ML350 G4 from Rack to Tower

 
SOLVED
Go to solution
Nick Bowers
Advisor

Converting ML350 G4 from Rack to Tower

Hi,
I am looking at changing my Ml350 to a Tower from a rack as it fits in my work area better as i don’t have a rack. I have found a ML350 G4 tower with nothing in it and should be able to get it cheap.
I just wanted someone to confirm that I can just change the face plate at the front and also put the feet on it.
Cheers
Nick
4 REPLIES 4
James ~ Happy Dude
Honored Contributor
Solution

Re: Converting ML350 G4 from Rack to Tower

Hello Nick,

I am sure that can be done !

Regards,
James.
Nick Bowers
Advisor

Re: Converting ML350 G4 from Rack to Tower

Hi,
Thank you very much.
Cheers,
Nick
Brian_Murdoch
Honored Contributor

Re: Converting ML350 G4 from Rack to Tower

Hi Nick,

The attached pdf file may help with the conversion. (It's for tower-to-rack) but you can reverse the procedure.

Remember to fit the plastic locking brackets to the rack front bezel (Step 5) or the tower door won't be a snug fit when it closes.

I hope this helps.

Brian
Nick Bowers
Advisor

Re: Converting ML350 G4 from Rack to Tower

Hi,
Thank you, it was a great lot of help.
Cheers