CPQSDM event log errors

[Ayman Altounji]

I am receiving the following error in the event log on every reboot:

Event ID: 7026
The following boot-start or system-start driver(s) failed to load:
CPQSDM

I have checked the devices list and it shows the Compaq SCSI Device Monitor set to boot, but not started. When I attempt to start it I receive a message that states the service is already started. I have removed and resintalled the v4.90 Management Agents to try to correct this problem.

I have the following SCSI adapters installed in this server(in addition to the on board SCSI controller which is unused):

3100ES Controller
Compaq Fiber Channel Host Bus Adapter (LP8000 chip set I believe)

I am not having any problems accessing any arrays in the internal storage or the Modular Array 8000 to which this server is connected.

Thanks.

[Ayman Altounji]

Disable the CPQSDM driver , the Integrated SCSI Controller is not used .