HPE Community
ProLiant Servers (ML,DL,SL)
1833137 Members
3396 Online
110051 Solutions
New Discussion

Creating DOS Network Boot disk for imaging Proliant ML330

 
Cellexchange Helpdesk
New Member

‎03-09-2005 08:09 AM

‎03-09-2005 08:09 AM

Creating DOS Network Boot disk for imaging Proliant ML330

I am trying to create a boot disk that will allow network functionality to create a Ghost image of an HP Proliant ML330 G3 server. The NIC is an HP NC7760 Gigabit.

Please help.

-Dylan
0 Kudos
Reply
3 REPLIES 3
DAN UELMAN
Occasional Advisor

‎03-10-2005 06:43 AM

‎03-10-2005 06:43 AM

Re: Creating DOS Network Boot disk for imaging Proliant ML330

I am lookling for the same thing. We need the dos drivers for this purpose. I have an NC7781 and cannot find dos drivers. Any help would be great
Dan
0 Kudos
Reply
Cellexchange Helpdesk
New Member

‎03-10-2005 07:29 AM

‎03-10-2005 07:29 AM

Re: Creating DOS Network Boot disk for imaging Proliant ML330

Yes, that much I knew. I have a disk that I used for another machine with different NIC drivers that will boot the machine into DOS without network, but that doesn't do me much good. I am really looking for the NIC drivers so I can actually image the disk to the ghost server.

-Dylan
0 Kudos
Reply
Cellexchange Helpdesk
New Member

‎03-10-2005 08:38 AM

‎03-10-2005 08:38 AM

Re: Creating DOS Network Boot disk for imaging Proliant ML330

I found the DOS drivers on the HP Site.

Search for:

sp29014.exe

and

sp19858.exe

Use whichever one you need.

-Dylan
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.