Disable OPS banner ILO

[NateU]

Hi Folks, we have a number of HPE Gen 11 servers that keep throwing up this OPS management banner? How do we disable it to be honest its advertising for a product we dont want or can use (ILOs are on a non routable vlan

Normally we wouldn't mind but the managment team are asking for it to be removed as they also consider it advertising..

Any ideas?

Ilo Login banner

[Greeshma21]

Hi @NateU 

Please refer to the iLO6 userguide, https://support.hpe.com/hpesc/public/docDisplay?docId=sd00002007en_us&docLocale=en_US&page=GUID-11DB1D8D-686C-45EC-AB7A-0A0C23BD8BAD.html, It might help you

Regards,
Greeshma

[NateU]

Sadly that doesn't give clues of how disable that banner

[shiva_jr]

Hi @NateU ,
    Please follow these steps-
1. Login to the iLO console,
2. Click Security in the navigation tree, and then click Login Security Banner.
3. Disable the option 'Enable Login Security Banner setting'.
4. Click on 'Apply'
Refer this document and image.

I hope, my post help you in disabling the iLO banner,  if yes, please give 'Kudos' and mark my post as 'Accepted solution.
Regards,
Shiva_jr

[NateU]

That's not the correct banner, the banner I wish to disable is in the screenshot above, the one telling me the system is capable of greenlake on login

[shiva_jr]

Hi @NateU ,
Try to disable the Compute Ops Management from ilo. Refer this image.


or 

I hope my post will resolve the banner issue, if yes, please give 'Kudos' and mark my post as 'Accepted solution.  Let me know if the issue persists.
Regards,
Shiva_jr

[udalsem]

@shiva_jr What is the HPe ilo powershell command to disable this?

When i run this: $connection | Disable-HPEiLOComputeopsManagement

ERROR: HPE.Famework.Core.StatusInfo

[shiva_jr]

Hi @udalsem , 
     This command is available from version iLO cmdlets version 3.3 onwards. Please verify whether you have the same or higher version in your system.   Refer this document. (View 'Revision history')}

     The StatusInfo message indicates that the error occurred due to the missing HPE iLO Channel Interface (CHIF) driver. Please refer this document.
      Install driver using SPP.
     
I hope, you got the solution for this cmdlets command error, if yes, please give KUDOS and mark my post as Accepted Solutions.
Regards,
Shiva_jr

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".