Disk Health = Proliant Servers

[Protechonline]

Hi,

Apart from logging in to iLo, is there a way to remotley find the health of drives in ProLiant Servers?

In the past you could get pre-failure infor from the SMH, but since that we only have iLo.

Maybe there is a command line that call pull back health status of all drives?

Thanks

Dave

[support_s]

System recommended content:

1. HPE ProLiant DL360 Gen10 Server User Guide | Active Health System Viewer

2. HPE ProLiant Servers - Health LED Remains Red During Production

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Protechonline]

Is AHSV a tool that I can download to read the AHS logs?

[sbhat09]

Hello @Protechonline,

You may find this ' iLO 4 Scripting and Command Line Guide' helpful to look for drive health status command:

https://support.hpe.com/hpesc/public/docDisplay?docId=c03334058

Regarding your query on AHSV tool - Yes, that is the tool to analyse AHS logs.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

[Protechonline]

Thanks, but where can I download the AHSV log viewer tool please?

Thanks

[sbhat09]

Hello @Protechonline 

The tool is for HPE internal only.

There is an online version available. Please check if it works with your login - https://www.hpe.com/servers/ahsv

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

[Protechonline]

Does not seem I can get to that link.

Shame that there is no other way to check drive health.

Thanks