DiskPart Error 'No fixed disks to show'

[jen25645825]

working on creating a 2019 windows server from the ilo of an hpe gen10+ server with an HPE MR216i-p Gen10+ controller. i have set the logical drives/raid and was getting ready to install the image via iso file when i ran diskpart/ list disk and received the following message DiskPart Error 'No fixed disks to show'. Everything appears to be correct under the system utilites screen for this controller but i dont know why the disks are not showing. Server is set for UEFI.

Any suggestions would be appreciated

[Croweb · Accepted solution]

It appears that your Windows .iso installation does not have the driver for the HPE MR216i-p controller.

You need to load it (section "Load Drivers") during the WIndows Server setup.

Regards,

[jen25645825]

thank you, will give this a shot and see

[jen25645825]

this resolved the error, thank you

[Sunitha_Mod]

Hello @jen25645825,

That's awesome! 

We are extremely glad to know the problem has been resolved.