Disks are not seen correctly

[MaxDM]

On a ProLiant DL380 Gen9 12LFF+2rear SFF with SmartArray P840 controller, 12 4Tera disks (all the same) + two SSD disks in the two rear slots.

From the ILO I see that the first 8 disks are seen correctly (Physical Drive in Port 1I Box 1 Bay 1 - Physical Drive in Port 1I Box 1 Bay 2 and so on), the other 4 starting from the ninth disk instead of seeing them on Physical Drive in Port 1I Box 1 Bay 9 I see it on Port 2I Bay 13 and without the wording BOX, I attach an image. Yet the disks are all the same and even swapping their places the problem remains.

[Cali]

Hi,

and your problem is the missing Word "Box"?

I would try to select them all and create a Raid, and if there is no error, everything will be fine.

Cali