HPE Community
ProLiant Servers (ML,DL,SL)
1848579 Members
1859 Online
104033 Solutions
New Discussion

Re: DL 320 G2 won't power up

 
John Ossenfort
New Member

‎01-21-2004 10:40 AM

‎01-21-2004 10:40 AM

DL 320 G2 won't power up

On its last reboot, our DL320 G2 failed to power up again.

The blue UID light has lit up on the front and back of the chassis but there are no other warning lights. Pressing the UID button seems to do nothing (much like the power button!).

All components seem secure and I have switched out the power supply and the fans with another DL320 to no effect. Any idea as to what is wrong or how it can be fixed?
0 Kudos
Reply
1 REPLY 1
Sunil Jerath
Honored Contributor

‎01-21-2004 01:46 PM

‎01-21-2004 01:46 PM

Re: DL 320 G2 won't power up

Hello John,
The best way to troubleshoot this would be to take the cover off and look for the Fault LEDs on the system board. If nothing is visible. Then reseat the obvious components i.e. RAM, Add on Boards and cables etc.

Regards,
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.