DL180 G6, Smart Array P212, problem with battarey

[marya_admins]

hi
i have been replace the battery in Smart Array P212 on DL180 G6 with part number 460499-001 spares number 462976-001
after server rebooting i get this message on screen: 1748-Slot 1 Drive Array - Unsupported Array Accelerator Battery Attached - Please install battery pack(s) with the correct part number. Array Accelerator is disabled.
In ACU i see this message: The cache for Smart Array P212 in Slot 1 is disabled because one or more attached batteries are not supported by the currently running firmware.
this problem exist on firmware versions 6.40 and 6.64
can you help me?
thanks in advanced

[marya_admins]

can anyone help me? please

[FabioC1]

marya_admins  In battery is there  some lable with this spare  462976-001 ?

ttp://partsurfer.hpe.com/ShowPhoto.aspx?partnumber=462976-001

Because there is others battery similar but used in others smart arrays

Look this => http://partsurfer.hpe.com/ShowPhoto.aspx?partnumber=398648-001

Used only P400i/p400

try update the firmware first for last version 6.64

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=3885794&swItemId=MTX_993349aa061b4897b5ae4d212e&swEnvOid=4184#tab4

[marya_admins]

FabioC1
yes, there is lable with spare 462976-001 on the battery. the battery is exactly on photo:
http://partsurfer.hpe.com/ShowPhoto.aspx?partnumber=462976-001
current firmware is 6.64
any ideas?

[marya_admins]

because of this i get error in SSA:
351 Smart Array P212 in Slot 1 CACHE STATUS PROBLEM DETECTED: The cache on this controller has a problem. To prevent data loss, configuration changes to this controller are not allowed. Please replace the cache to be able to continue to configure this controller.
can anyone help me?