HPE Community
ProLiant Servers (ML,DL,SL)
1834722 Members
2531 Online
110069 Solutions
New Discussion

DL320 G2 Boot Issues

 
David Youngblood
New Member

‎06-11-2007 06:15 AM

‎06-11-2007 06:15 AM

DL320 G2 Boot Issues

Added SATA PCI card to open PCI slot 1 on DL320 for external data drive use only. Integrated IDE drive has OS installed. BIOS boot order is CD, Floppy, IDE, PCI Slot 1. If no SATA drives are attached to SATA PCI card, server boots normally to IDE. However, when I attached SATA drive to SATA PCI controller card, server tries to boot from SATA PCI card even though it is last in the boot order. Any ideas? I have tried to different SATA PCI cards and it makes no difference. Called SATA card Mfg and they said that DL320 BIOS controls the boot process. Any ideas anyone? Thanks in advance - David
0 Kudos
Reply
3 REPLIES 3
GB Tek
Valued Contributor

‎06-11-2007 08:02 AM

‎06-11-2007 08:02 AM

Re: DL320 G2 Boot Issues

Check the Boot Controller Order in the RBSU (F9). What does it say?
Ask and you shall receive
0 Kudos
Reply
GB Tek
Valued Contributor

‎06-11-2007 08:06 AM

‎06-11-2007 08:06 AM

Re: DL320 G2 Boot Issues

Check the Boot Controller Order in the RBSU (F9). Report the output back to the forum.
Ask and you shall receive
0 Kudos
Reply
David Youngblood
New Member

‎06-11-2007 08:53 AM

‎06-11-2007 08:53 AM

Re: DL320 G2 Boot Issues

Boot Controller Order

Cltr:1 PCI Embedded Integrated Ultra ATA-100 IDE Raid Controller
Cltr:2 PCI Embedded HP PCI IDE Controller
Cltr:3 PCI Slot 1 Raid Mass Storage Controller

Standard Boot Order

IPL:1 CD-Rom
IPL:2 Floppy
IPL:3 Hard Drive C: (See Boot Controller Order)
IPL:4 PCI Embedded HP NC7760 Gigabit Server Adaptor
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.