DL360 G1 no output

[rainydays137]

I've got 4 DL360 1st generation servers i am troubleshooting all showing the same behaviour. Below is a summary of my testing. Anyone Know whats going on? Am I missing something?

Hardware List:
4x DL360 G1 bare (motherboard and chassis)
2x sticks of PC133 ram
2x 866mhz P3 processors
1x 1ghz P3 processor
2x Management Boards

Observed behaviour:
* Shuts down automatically a few minutes after boot when either management board is present. Otherwise continues running without management board present
* Displays nothing on either the embedded vga out or the management boards vga out. Whether "Video Disable Override"(SW2 setting 1) is on or off

All are tested with a single processor and one stick of PC133 ram.


dl360 #0:
motherboard model 224
SW2: 1 off
SW2: 1 on
tried 1ghz proc
tried 2 different 866mhz procs
tried different stick of pc133 ram
tried 2 management boards
tried without management board
behaviour same

dl360 #1:
motherboard model 139
SW2: 1 off
SW2: 1 on
tried 2 different 866mhz procs
tried different stick of pc133 ram
tried 2 management boards
tried without management board
behaviour same

dl360 #2:
Motherboard model 139
SW2: 1 off
SW2: 1 on
tried 2 different 866mhz procs
tried different stick of pc133 ram
tried 2 management boards
tried without management board
behaviour same

dl360 #3:
motherboard model 139
SW2: 1 off
SW2: 1 on
tried 2 different 866mhz procs
tried different stick of pc133 ram
tried 2 management boards
tried without management board
behaviour same

[sandeep_raman]

Hello rainydays137,

1.Have you reset the Maintenance switch SW6?
2.If its not in a remote site,can you boot through the SSCD and monitor if it behaves the same way?
3.Whats the ROM and PSP version?
4.Does system log,iml and insight diagnostics(survey) report any error?

SRH

[sandeep_raman]

Argh,forgot the SM guide,

http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_169616-006_rev6_us/TPM_169616-006_rev6_us.pdf
Pg 5-6 (144 of 177)

SRH