HPE Community
ProLiant Servers (ML,DL,SL)
1826367 Members
3545 Online
109692 Solutions
New Discussion

DL380 G8 refuse to boot

 
swedGuy
New Member

‎09-29-2021 06:09 AM - last edited on ‎09-30-2021 02:15 AM by

‎09-29-2021 06:09 AM - last edited on ‎09-30-2021 02:15 AM by

DL380 G8 refuse to boot

Hey guys

I have a DL380 g8 that refuse to boot from HDD, i need to pull out all drives execpt the SSD that contains the os (TrueNAS) to get it to boot.

I have tried many ways to fix this but nothing seems to work.

There are 8 drives (spinning) plus 1 SSD for the os. I have pressed F11 during post to get an option to select HDD boot. But it does not find the drive it seems.

All drives are indivudual drives and not together in an array. How can i select the drive in bay 11 to be the standard boot drive?

 

Thank you and stay safe!

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎09-29-2021 07:18 AM

‎09-29-2021 07:18 AM

Re: DL380 G8 refuse to boot

Try to go into SSA during boot and select the drive as active boot drive.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.