Query: DL380 Gen10 missing Embedded SATA Controllers - Prolaint server - DL380 Gen 10

[MikeBran]

We have a number of DL380 Gen 10s all with the same configuration. NO Raid controller and they have a single 8 bay drive tray connected to the onboard SCSI controllers. We are now repurposing these servers for some non production activities and we found that one of them refuses to show more than 1 embedded Sata controler. We have filled the 8 pays with 8 HPE 1.9GB sata SSD. ONly 4 of them are presented to the OS. Lights dont come on for the other 4. Ilo inventory only shows 1 Sta Embedded controller however on the exact same configured other Server it shows 2. I have looked all throught the bios settings and cant find anywhere where this may be disabled. 

[support_s]

System recommended content:

1. HPE ProLiant DL380 Gen10 Server - Blank SMH Screen

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[MikeBran]

Apologies but im struggling to see how your post is relevent to my issue

[Suman_1978]

Hi,

You can try the following:
Check the cable routing, try with different cable if available.
Reset BIOS settings
Clear NVRAM using S6 switch.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics