DL380 OS Disks cannot boot up

[jamesky]

Hi All,

We are having a mirror using disk array. We normally break mirror and in this instance, we have booted from slot 1 and it worked. We tried to revert to slot 0 the following day and then it would not boot. We then tried to revert back to the slot 1 and boot up and it also does not boot.

As of now, the 2 disks cannot be booted up and 1 disk could not be detected by the hardware (ACU). How is this possible? Could there be a problem with the pressing of F1 and F2 (interim recovery mode) sequence in which the array configuration was lost or corrupted? Should be be a problem with disk? ACU?

I know that it happened to my colleague before and I am guessing that it was the same thing. Can someone enlighten me on this?

TIA,
James

[Diego Castelli]

Hi James,

you break mirror in wich way? Using the scripting toolkit or removing the second hard-drive?


Diego.