DL380G6: PSP 8.41 for linux RH 5.5 not works completly with /s flag

[Pierre31]

Hello

I try to automate the install Linux RedHat 5.5 on standalone servers, and with KickStart, it is easy.

Next, I want to run a script without any operator action for installing PSP 8.41.

To do so, I install 2 mandatory rpm (libnl & net-snmp)

Then at this step, if I launch hpsum only to view, I have 32 components found and 32 components READY (green).

Then, I exit from hpsum.

Then, I issue the command  ./hpsum /s [/silent]

The error code is 253 (The installation of the component failed !)

At the end, I have 2 problems

First, no log file was produced (excepted /var/log/hp-health/hpasmd.log and /var/log/hp-snmp-agents/cma*.log)

Second, all components are not passed. Only 14 of 32 are OK. the others are not failed but not passed

If I launch now hpsum (with gui) , it works well for the previous missing 18 components, and PSP is ok.

But, I don't unserstand at the first run (./hpsum /s) , which error appends and why?

Thank you for your help!

Pierre S.

(I have tried with PSP 8.50, it is the same problem)