DL380p G8 fan control problems

[BenceDeminger]

So
I did the resets and some othet things.
I figured out that one of the hdds gives constant 50C value to the ilo HD-MAX “sensor” and this is why the fans run on high speed. When i remove this hdd the othets give a 35C value witch is low enough to the fans to run on normal speed but when i put back that hdd it gave the 50C value again so the fans run on max.
How can i reset the hdd’s max temperature value? Because i think that the hdd gives it’s maximum vaule, not the actual and this is the problem. Is there any sollution for this problem?

[Jimmy Vance]

You cannot modify the disk temp values

[BenceDeminger]

It’s ok but can i reset the max temp of the hdd?

[mohammadhaider]

It happend to my DL380P G8.
I just take out it's fan plate from the back of it and remove the dust on it with air blower. now it's again silent.