DL385 Gen10 memory remap option missing

[steez]

Hello everyone,

After a memory replacement we received an event stating that memory could not be retrained and therefore is left unused. As per HPE guide we tried to remap memory, however the option is missing from the Memory Options screen. Server has the newest firmware.

Has anyone seen this issue? As this is an AMD server, maybe there is another procedure for this.

[Greeshma21 · Accepted solution]

Hi @steez 

The Memory Remap option is typically available in the BIOS/UEFI settings for Intel-based systems, but AMD systems handle memory remapping differently. On AMD EPYC systems, memory remapping might be automatically managed by the processor architecture rather than exposed as a configurable option in UEFI.

For more info, please refer to the quick specs.

Regards,
Greeshma

[support_s]

System recommended content:

1. HPE ProLiant DL385 Gen10 Plus Server - Product Information Reference | Product features

2. HPE ProLiant DL385 Gen10 Server - Product Information Reference | Product features

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[steez]

Thank you @Greeshma21 for reply and comments. We will go ahead and open a case regarding this, as even after the module replacement status is failed/unused.