DL585 G2 AND KVM 1X8 Server Console Switch

[Diogo_Conrado]

I got a DL585 G2 and I want to install the server with a KVM 1X8 Server Console Switch (400337-001). There is an issue when I try to start or reboot the server because if the display(TFT) is used to another server the DL585 G2 does't boot. It´s necessary go back the TFT to DL585 G2 and press any key, so the server boots fine. If the TFT is switched to DL585 G2, there is no problem. I've tested with another KVM (400337-001) and the failure is the same. The KVM was tested in another DL585 G2 and the failure is the same.

When I conected a KVM IP there is no problem.

Have you any idea about this problem?