Query: Do not display raid disk when install centos 7.2 on HPE P408i-a sr raid contraller - Prolaint server - DL380 Gen10

[chany]

i try intall centos 7.2 on DL380 Gen10 with P408i-a sr raid controller.

destination disk is NULL.

but centos 7.3 has display array vulume at this server.

I must be use centos 7.2 . because san client support olny centos 7.2.

cloud let me know how install centos 7.2  or let me know where i can download raid controller driver image for centos 7.2 .

[support_s]

System recommended content:

1. HPE ProLiant DL380 Gen10 Plus Server - Overview

2. HPE ProLiant DL380 Gen10 Server - LED Indicators

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Moderator edit: Updated the link.]

[Suman_1978]

Hi,

You may check the drivers for P408i-a controller here.
I presume CentOS 7.2 is equal to Red Hat 7.2, if yes its not supported.
Also check the Community Enterprise Linux.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

[chany]

thanks to reply.

i used same specification server on my site.

i was installed centos 7.2 another server without issue.

the one server has problem about firmware error . so I updated to SPP ver. 202309 .

i was fixed problem form firmware. but i don`t install new os(censos 7.2).

another server's raid controller firmware version is 5.00  and new firmware version is 6.22.

at last version(raid controller fw 5.00) is do not has any problem when install centos 7.2

I guess that this course is raid controller firmware issue.

[chany · Accepted solution]

i solved this issue.

The reason is P408i-a firmware version.

I was downgraded raid controller firmware version change  due 6.22 to 3.00.

Centos 7.2 is succesefully detected raid array volume.

[Sunitha_Mod]

Hello @chany,

That's awesome! 

We are glad to know you were able to find the solution and we appreciate you for keeping us updated. 

[Graoully]

Hello @chany,

Where can I find the firmware 3.00 please ?

Thanks

[chany]

Hi, Graoully,

I used the SPP image tool to downgrade the RAID firmware. You can get the SPP image from at link.

https://support.hpe.com/connect/s/softwaredetails?language=ko&collectionId=MTX-5d74fe753828448f&tab=Important&softwareId=MTX_4059514b5d7241f88322e431d4"

You can download the RAID driver with a version lower than 22.0.3.1.