Drive monitoring is NOT enabled

[Alexander Fok]

System Model: ProLiant DL360 G5
When I run Array Diagnostic Utility
I receive the following error report:
SLOT 0 Smart Array P400i Controller ERROR REPORT:

Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 1
Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 2
Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 3
Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 4
Drive monitoring is NOT enabled for Port 2I, Box 1, Bay 5
Error occurred reading RIS copy from Port 1I, Box 1, Bay 1
Error occurred reading RIS copy from Port 1I, Box 1, Bay 2
Error occurred reading RIS copy from Port 1I, Box 1, Bay 3
Error occurred reading RIS copy from Port 1I, Box 1, Bay 4
Error occurred reading RIS copy from Port 2I, Box 1, Bay 5

===========

I attach here the full report. Is there anything wrong? what shuold I do?
Many thanks in advance for your advice.

[Mauro Rusignuolo]

first of all, install the last HP PSP.
update the controller firmware also.

7.80.6.0 ACU and 7.80.2.0 7.ADU are availeble.

also, you controller firmware it's a little bit old ...

bye.

TJK.