Error CPQArray2

[Ayman Altounji]

I have this error on all the server DL580 OS Win2k:
Source: CpqArry2. Event ID: 15. Description: the device, \Device\SCSI\cpqArry21 is not ready for access yet.
The RomBios is dated 21/1/2001. The firmware of the array is 1.42. Smart Start 4.90B. Any ideas? Thanks a lot. Matteo

[Ayman Altounji]

Does it only happen during startup of Win2k? If so, it's Win2K... the OS is trying to access the array before the driver can finish loading.

[Ayman Altounji]

I have this same issue happening on all of my Compaq DL580 servers also. Now that we know that it is an issue with Win2K trying to access the array before the driver can finish loading, is there a way to prevent the driver from loading until it is ready? Thanks in advance!

[Ayman Altounji]

I have the same error on a DL580 using Windows 2000 Advanced Server Service Pack 1, with a SMART Array 4200 version 1.30A. Is there a fix to this?

[Ayman Altounji]

I found this on the site. Apparently this is event entry is for info only. Here you go:

http://www.compaq.com/support/techpubs/customer_advisories/EM001102_CW01_0.html